potrzebuje pomocy z tuya-convert. Jestem zielony z linuxa ale poszedłem po linii instrukcji znalezionych na tym forum i innych internetach.
- Zainstalowałem Ubuntu 22.04 LTS
- Zainstalowałem wszystkie sugerowane aktualizacje
- W terminalu wykonałem polecenia:
- sudo apt-get update
- sudo apt-get upgrade
- sudo apt-get install git
- git clone https://github.com/ct-Open-Source/tuya-convert
- cd tuya-convert
- sudo ./install_prereq.sh
- sudo ./start_flash.sh
Kod: Zaznacz cały
fatal: unsafe repository ('/home/ja/tuya-convert' is owned by someone else)
To add an exception for this directory, call:
git config --global --add safe.directory /home/****/tuya-convert
tuya-convert
======================================================
TUYA-CONVERT
https://github.com/ct-Open-Source/tuya-convert
TUYA-CONVERT was developed by Michael Steigerwald from the IT security company VTRUST (https://www.vtrust.de/) in collaboration with the techjournalists Merlin Schumacher, Pina Merkert, Andrijan Moecker and Jan Mahn at c't Magazine. (https://www.ct.de/)
======================================================
PLEASE READ THIS CAREFULLY!
======================================================
TUYA-CONVERT creates a fake update server environment for ESP8266/85 based tuya devices. It enables you to backup your devices firmware and upload an alternative one (e.g. ESPEasy, Tasmota, Espurna) without the need to open the device and solder a serial connection (OTA, Over-the-air).
Please make sure that you understand the consequences of flashing an alternative firmware, since you might lose functionality!
Flashing an alternative firmware can cause unexpected device behavior and/or render the device unusable. Be aware that you do use this software at YOUR OWN RISK! Please acknowledge that VTRUST and c't Magazine (or Heise Medien GmbH & Co. KG) CAN NOT be held accountable for ANY DAMAGE or LOSS OF FUNCTIONALITY by typing yes + Enter
======================================================
Cleaning up...
No screen session found.
No screen session found.
No screen session found.
No screen session found.
Closing AP
Exiting...
Prośba do bardziej zaawansowanych linuxusers możecie podpowiedzieć o co chodzi i czego nie zrobiłem?